13 Best Tapered End Mills

List Updated May 2020

Bestselling Tapered End Mills in 2020


4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated

4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8
BESTSELLER NO. 1 in 2020

SpeTool Ball Nose Tapered End Mill 1/4"Shank 2-Flute with 1.5mm Ball Router bits HRC55 TiAlN Coated

SpeTool Ball Nose Tapered End Mill 1/4
BESTSELLER NO. 2 in 2020
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time

2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 5.09° Tip Radius=0.25mm X 1/8" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 5.09° Tip Radius=0.25mm X 1/8
BESTSELLER NO. 3 in 2020

2pcs/package CNC Carving 2 flutes Tapered Ball end mills Angle 3.20° Tip radius=0.75mm X 1/8" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

2pcs/package CNC Carving 2 flutes Tapered Ball end mills Angle 3.20° Tip radius=0.75mm X 1/8
BESTSELLER NO. 4 in 2020

1/8" Tip Dia. x 2" Flute Length - Solid Carbide Tapered End Mill - 1 Degree Per Side, Ball End

1/8
BESTSELLER NO. 5 in 2020
  • Solid Carbide
  • Shank Diameter: 1/4"
  • Overall Length: 4"

JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4
BESTSELLER NO. 6 in 2020

SpeTool Tungsten Carbide Tapered End Mill 1/4" Shank 3" OVL with 1.0MM Tips for Woodworking Carving CNC Tool

SpeTool Tungsten Carbide Tapered End Mill 1/4
BESTSELLER NO. 7 in 2020
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time

SpeTool Ball Nose Tapered Cone End Mill 1/4"Shank 2-Flute with 0.25mm Ball HRC55 TiAlN Coated

SpeTool Ball Nose Tapered Cone End Mill 1/4
BESTSELLER NO. 8 in 2020
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Ball Raidus: 0.25mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 5.26Deg
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time

Conical Tool Company E-306C 5.0° Carbide Tapered End Mill - 3 Flute x 3/16'' Tip x 0.4500'' Large Diameter x 1/2'' Shank x 1 1/2'' Length of Cut x 3 1/2'' Overall Length

Conical Tool Company E-306C 5.0° Carbide Tapered End Mill - 3 Flute x 3/16'' Tip x 0.4500'' Large Diameter x 1/2'' Shank x 1 1/2'' Length of Cut x 3 1/2'' Overall Length
BESTSELLER NO. 9 in 2020

SpeTool Tapered Ball Nose End Mill 1/4" X 3" with 0.75mm Ball Nose 4.36Deg for CNC Machine Engraving Carving

SpeTool Tapered Ball Nose End Mill 1/4
BESTSELLER NO. 10 in 2020
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time

SpeTool Carbide 0.25 Radius 4MM Shank 4.9Deg Ball Nose Tapered End Mill HRC55 TiAIN Coated

SpeTool Carbide 0.25 Radius 4MM Shank 4.9Deg Ball Nose Tapered End Mill HRC55 TiAIN Coated
BESTSELLER NO. 11 in 2020
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • 4mm Shank Diameter, 2 Flutes, TiAIN Coated
  • Ball Raidus: 0.25mm, Flute Length:20.5mm, Overall Length: 50mm, Single Side Angel: 4.9Deg
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time

6mm R0.75 Carbide Tapered Ball Nose End Mill Taper and Cone Endmills R0.75*D6*20*50L*2F HRC55

6mm R0.75 Carbide Tapered Ball Nose End Mill Taper and Cone Endmills R0.75*D6*20*50L*2F HRC55
BESTSELLER NO. 12 in 2020

Uxcell a12121300ux0202 Cutting Slotting End Mill Router Bit 4 Flute 1/4" Shank 1/4" Diameter

Uxcell a12121300ux0202 Cutting Slotting End Mill Router Bit 4 Flute 1/4
BESTSELLER NO. 13 in 2020
  • 2-1/2-inches in total length
  • 4 flutes and 1/4-inch in diameter
  • Made in China

Fast and Efficient Does Not Equal Good Customer Service These Days

I asked if they could squeeze me in, to which the nice lady replied she could pencil me at 4:30, if that would work. A simple 'yes' would have done the trick, given it was 4:28 and there were only 3 hair artists milling about. I smiled and nodded, "Great!"

I asked if they could squeeze me in, to which the nice lady replied she could pencil me at 4:30, if that would work. A simple 'yes' would have done the trick, given it was 4:28 and there were only 3 hair artists milling about. I smiled and nodded, "Great!"

"Have a seat, it'll be just a sec and Jody will be with you," the receptionist/hair expert said, nodding toward the magazine-littered waiting area. I obliged, sat, and opted to forego thumbing through the 6-month-old edition of People magazine.

Four thirty-five came and I thought if this is a 'sec,' I'm glad they didn't say they'd be with me in a minute! I finally got the call from Jody, who looked as if she too often hit McDonalds on the way home from work. She gave a feigned smile. "Right this way, please," she waved as she walked to her station.

I nearly slipped on the hair clippings as I pivoted into the chair, wondering how on Earth it took north of 5 minutes for her to call me from the waiting area?!? Clearly, she hadn't been sweeping! Were I to guess, there must be sign in the break room reading "Gossip first, customers second."

As she snugly applied the malodorous cape, she looked at me through the mirror and asked how short I wanted it. I gave her the usual: "No. 2 clipper on the sides and back. Longer on top, please."

She was quick on the draw, sufficiently dousing the apparent campfire on my head. She obviously didn't care it was dripping on my face as she locked and loaded her clippers. Without uttering a word, she turned on the clippers, put her free hand on top of my head and pushed forward so my chin touched my chest. As the clippers fired up I furrowed my brow. Okay, that was odd, I thought, normally they say something like, "Look down, please," or "Chin down," don't they?

While she efficiently made her way around my head with her clippers, I pondered the type of silence: comfortable or uncomfortable? This was beyond uncomfortable and was quickly approaching "creepy." She was over half done and hadn't said a word?!?

Did I remember my deodorant? Was my breath warping the mirror? I guess it could've been me but I was pretty sure she was just having a lousy day. With just the drone of the clippers working away, and plenty of uninterrupted time to think, I couldn't help but wonder why this lady wouldn't say a thing to me.

I don't care if I get the 'my-boss-said-I-have-to-say-this' type of line or if she's genuinely interested in sparking up a conversation, just say something! Tell me you're having a bad day because your cat died! I'm fine with knowing you're not thrilled that your grease-ball boyfriend slept with your best friend-can't wait to see you on Jerry Springer. Just give me anything but the silent treatment!

"How's that length?" she asked, breaking the silence. I was so deep in thought, and nearly asleep, I hadn't even noticed she had holstered the clippers and was snipping hair off the top.

Caught off guard, I asked, "Uhhh, can we go another half-inch shorter on top?" What was I thinking?!? I could've painlessly walked away, yet there I went, ruining her life! I hope she didn't see me wince after the question.

She sighed. "Yep, no problem," she mumbled as she grabbed the spray bottle, dousing more flames. Her cutting style rapidly transformed from five-percent-tip gentle to my head being an abused bowling pin.

At this point, she was breathing rather hard so I can't say there was complete silence-especially factoring in it was through one nostril, which whistled-but it was still in the realm of creepy.

Luckily, the cut ended with no blood. As I left after paying, I couldn't help but ask myself: why is it that I am made to suffer when asking a person to complete a simple, core element of their job? What is wrong with customer service these days?!?

Related Bestselling Lists That You Might Like