13 Best Shell Rigging Blocks

List Updated September 2020

Bestselling Shell Rigging Blocks in 2020


Load Rated - Single Sheave Rigging Wood Block w/Swivel Hook (6" for 3/4" Rope)

Load Rated - Single Sheave Rigging Wood Block w/Swivel Hook (6
BESTSELLER NO. 1 in 2020
  • Wood Block w/Swivel Shackle Single Wheel
  • Made of Wooden Shell and Galvanized Forged Steel Parts
  • Load Rated- WLL: 1,800lbs
  • Height of Woodshell: 6-1/2" - For 3/4" Rope
  • Package is for: 1pc

Heavy Duty Load Rated - Double Sheave Rigging Wood Block w/Hook (6" for 3/4" Rope)

Heavy Duty Load Rated - Double Sheave Rigging Wood Block w/Hook (6
BESTSELLER NO. 2 in 2020
  • Wood Block w/Hook Double Wheel
  • Made of Wooden Shell and Galvanized Forged Steel Parts
  • Load Rated- WLL: 2,500lbs
  • Height of Woodshell: 6-1/2" - For 3/4" Rope
  • Package is for: 1pc

Load Rated - Double Sheave Rigging Wood Block w/Swivel Hook (3" for 3/8" Rope)

Load Rated - Double Sheave Rigging Wood Block w/Swivel Hook (3
BESTSELLER NO. 3 in 2020
  • Wood Block w/Swivel Shackle Double Wheel
  • Made of Wooden Shell and Galvanized Forged Steel Parts
  • Load Rated- WLL: 800lbs
  • Height of Woodshell: 3-1/2" - For: 3/8" Rope
  • Package is for: 1pc

Campbell 3042K 6" Double B and L Star Metal Steel Shell Block with K Screw Pin Anchor Shackle, 3300 lbs Load Capacity, 3/4" Rope, 3-1/2" Sheave

Campbell 3042K 6
BESTSELLER NO. 4 in 2020

Campbell 3002Af, 4" Double, Regular Wood Shell Block, Bronze Bushed, Galvanized (7206936) (Includes 1)

Campbell 3002Af, 4
BESTSELLER NO. 5 in 2020
  • 4" Double Pulley Wooden Shell Rope Block

30 Pack Safety R-Clip Bend Body Clips for Stage Lights Truss Coupler Pin End Cap RC Car Parts Truck Buggy Shell Replacement

30 Pack Safety R-Clip Bend Body Clips for Stage Lights Truss Coupler Pin End Cap RC Car Parts Truck Buggy Shell Replacement
BESTSELLER NO. 6 in 2020
  • 30-Piece Safety R-Clip Set.
  • Material: spring steel, steel wire diameter 0.2mm .
  • Scene one:Stage light truss Coupler Pin fixed accessories.
  • Scene two:Fastener used to prevent a wheel or other rotating part from sliding off the axle upon which it is riding
  • Commonly used with clevis pins and shafts.

Block and Tackle with Block 267, Anchor Hook 259, Spliced to Block 268 Klein Tools H1802-30SSR

Block and Tackle with Block 267, Anchor Hook 259, Spliced to Block 268 Klein Tools H1802-30SSR
BESTSELLER NO. 7 in 2020
  • Available with a guarded snap hook with the nose lengthened to extend over the latch or keeper
  • Hooks fit under insulator and engage pin on cross arm
  • Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings
  • 25-foot (7.62 m) rope length is spliced to the block
  • These are NOT occupational protective hooks. NOT for human support

Load Rated - Triple Sheave Rigging Wood Block w/Shackle (4" for 1/2" Rope)

Load Rated - Triple Sheave Rigging Wood Block w/Shackle (4
BESTSELLER NO. 8 in 2020
  • Wood Block w/Shackle Tripple Wheel
  • Made of Wooden Shell and Galvanized Forged Steel Parts
  • Load Rated- WLL: 1,800lbs
  • Height of Woodshell: 4-1/2" - For: 1/2" Rope
  • Package is for: 1pc

Heavy Duty Load Rated - Double Sheave Rigging Wood Block w/Swivel Eye (6" for 3/4" Rope)

Heavy Duty Load Rated - Double Sheave Rigging Wood Block w/Swivel Eye (6
BESTSELLER NO. 9 in 2020
  • Wood Block w/Swivel Eye Double Wheel
  • Made of Wooden Shell and Galvanized Forged Steel Parts
  • Load Rated- WLL: 2,500lbs
  • Height of Woodshell: 6-1/2" - For 3/4" Rope
  • Package is for: 1pc

Model Shipways USF Confederacy 1778 1:64 Ship kit MS2262 SALE - Model Expo

Model Shipways USF Confederacy 1778 1:64 Ship kit MS2262 SALE - Model Expo
BESTSELLER NO. 10 in 2020
  • aser cut basswood and walnut components, including port sills, lintels and uprights. We supply nearly 400 basswood and walnut strips, over 250 boxwood blocks (for cannon), deadeyes, and 300 eyebolts.
  • brass strips, tubes, nails and split rings; cast metal ship's wheel and anchors; blackened wire and four diameters of rigging line.
  • Twenty-eight cast Britannia 12-pounder cannon and 4 six-pounders on wooden carriages replicate Confederacy's armament.
  • Figurehead, stern decorations and other ornamental pieces are also cast metal. Two realistically detailed ship's boats are plank-on-bulkhead mini-kits with the center bulkheads removed, leaving fully framed shells lashed to skid beams. Kit includes laser cut display cradle.
  • Five sheets of plans leave no detail unrecorded, and the 150-page illustrated step-by-step instruction manual is the most complete ever done. View the link to the PDF below!

Campbell 3001K 5" Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1200 lbs Load Capacity, 5/8" Rope, 1-3/4" Sheave

Campbell 3001K 5
BESTSELLER NO. 11 in 2020
  • Screw pin anchor shackle "K"
  • Hard wood shells; screw pin anchor shackle fitting type
  • Drop forged fittings
  • Available with bronze self-lubricating bushings
  • Galvanized metal parts

Emotion Glide Kayak (Red)

Emotion Glide Kayak (Red)
BESTSELLER NO. 12 in 2020
  • Padded Backrest and Comfort Thigh Pads. Comfort Rest System (CRS) + UltraLite Seat Provides Fold-Down Convenience
  • Ledge Lock Paddle Keeper for Convenient Paddle Storage. Built-In Foam Blocks for Additional Flotation
  • Heavy-Duty Adjustable Foot Brace System for Comfortable Paddling. Bow & Stern Shock Cord Straps to Secure Gear. Front & Rear Toggle Handles
  • Slight V-Shaped Hull Gives Excellent Stability and Tracking. Lightweight 37 lb. Design
  • Roto-Molded UV-Protected Linear Polyethylene. 5-Year Limited Warranty
  • Roto-Molded from Ultra-Durable UV Protected Linear Polyethylene Plastic
  • The ST Performance Hull Offers Speed, Tracking and Maneuverability for Nearly all Water Conditions
  • Padded and Ajustable Seat Provides Comfort and Fold Down Convenience
  • Bow and Stern Rigging Allow for Easy Access to Secured Gear
  • Heavy Duty Adjustable Foot Braces for Comfort and Secure Foot Bracing

Block and Tackle with Blocks 267 and 268 and Anchor Hook 259 Klein Tools H1802-30SR

Block and Tackle with Blocks 267 and 268 and Anchor Hook 259 Klein Tools H1802-30SR
BESTSELLER NO. 13 in 2020
  • Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load
  • Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings
  • 25-foot (7.62 m) rope length is spliced to the block
  • Hooks fit under insulator and engage pin on cross arm
  • Maximum safe load is 750-pound (340 kg)

Phoenix Company Indicted for Violations of Bid Rigging in Safeway Stores

The Justice Department has announced an indictment against Alliance Mechanical LLC, a commercial refrigeration company in Phoenix Arizona, and its co-owner Kendall Pope

The indictment, which was filed on August 14 in U.S. District Court in Phoenix, charges that they were part of a conspiracy beginning about January 2005 and ending on May 16, 2005. Pope was the president of Alliance Mechanical LLC and as such he entered into a conspiracy with James Govostes, a former manager of another commercial refrigeration company.

In the indictment, Pope, Alliance and the co conspirators are charged with the following actions regarding the Safeway projects.

The discussed the submission of the bids and agreed to split the bids among themselves according to which company had a maintenance agreement at a particular store. In other works, if one company was the maintenance agreement at one of the stores, the other company would not put in a bid to supply equipment or do maintenance or put in a high bid so the company who already had the contract would be sure to continue.

They solicited others to come and join in the conspiracy.

They accepted payment from Safeway for the work that was assigned due to their illegal conspiracy.

These actions are in violation of the Sherman Anti Trust Act and it carries a maximum fine of $100 million for each corporation that is involved. There is also a felony charge involved for the individuals involved and that one carries a maximum fine for each individual of $1 million and up to 10 years in federal prison. However the maximum fine may be raised to twice the amount of the monetary gain that they got from the crime or twice the loss suffered by the victims if either one of these figures turns out to be higher than the statutory maximum fine.

This indictment is the result of an ongoing investigation into the entire commercial refrigeration industry that is operating in the Phoenix, Arizona metropolitan area. Govostes pleaded guilty on June 27,2020 to conspiring to restrain trade in the refrigeration industry by the act of rigging bids that he had submitted to Safeway. At the time he entered into a plea agreement, which is still subject to court approval, that if approved would require him to spend 30 days in prison to be followed by three months house arrest. He will also have to pay a $20,000 fine. He has agreed to assist the Government with the rest of the investigation.

Source: Department of Justice

Related Bestselling Lists That You Might Like