13 Best Power Tool Parts & Accessories

List Updated November 2020

Bestselling Power Tool Parts & Accessories in 2020


Keyless Chuck Conversion - ¼” of Heavy Duty and Durable Drill Bit quick Change Adapter - Tools & Home Improvement, Power & Hand Tools, Power Drill Parts & Accessories, Drill Chucks – By Katzco

Keyless Chuck Conversion - ¼” of Heavy Duty and Durable Drill Bit quick Change Adapter - Tools & Home Improvement, Power & Hand Tools, Power Drill Parts & Accessories, Drill Chucks – By Katzco
BESTSELLER NO. 1 in 2020

BE Pressure 85.400.007 Washer Gutter Cleaner Attachment, 4000 PSI, Chrome/Brass

BE Pressure 85.400.007 Washer Gutter Cleaner Attachment, 4000 PSI, Chrome/Brass
BESTSELLER NO. 2 in 2020

Power Probe PPPPSET Piercing Probe Set

Power Probe PPPPSET Piercing Probe Set
BESTSELLER NO. 3 in 2020
  • 4mm Std. Banana Jack Fitting
  • 6.5" & 7.5" Probe Tip
  • Female to Female Adapter
  • Self Centering & Adjustable
  • Handles 28 - 8 gauge wire
  • 4mm Standard Banana Jack and Plug Fittings
  • Gender Matching Adapter

Security Bit Set Of 100 – Heavy Duty and Durable Set of Security Bit Set – Tools & Home Improvement, Power Fastening Tool Parts & Accessories, Screwdriver Bits, Specialty Bits – By Katzco

Security Bit Set Of 100 – Heavy Duty and Durable Set of Security Bit Set – Tools & Home Improvement, Power Fastening Tool Parts & Accessories, Screwdriver Bits, Specialty Bits – By Katzco
BESTSELLER NO. 4 in 2020

Milwaukee 48-76-4008 Quik-Lok 8-Foot 3 Wire Grounded Cord

Milwaukee 48-76-4008 Quik-Lok 8-Foot 3 Wire Grounded Cord
BESTSELLER NO. 5 in 2020
  • The product is easy to use
  • The product is durable
  • The product is manufactured in China
  • 8 ft., three-wire grounded
  • Quik-Lok feature allows for fast replacement of a damaged cord
  • Premium grade Hi-Flex wire
  • 5-15P NEMA type plug

Dremel 225-01 Flex Shaft Attachment

Dremel 225-01 Flex Shaft Attachment
BESTSELLER NO. 6 in 2020
  • The product is Moto Tool Flex Shaft
  • Comfort grip hand piece allows finger tip control to cut, grind, sand, sharpen, polish and more
  • Integrated shaft lock button on the hand piece allows for easy accessory changes
  • Quick connect - easily attaches to your Dremel rotary tool
  • More flexible cable - provides more comfort during use.
  • For use with rotary tool models 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 4200, 3000, 8220

Skil® Strain Relief 1619X02971

Skil® Strain Relief 1619X02971
BESTSELLER NO. 7 in 2020

Camco RV Leveling Scissor Jack Socket Drill Adapter, Fits 3/8" and 1/2" Power Drills, Works With All 3/4" Hex Drive Jacks (57363)

Camco RV Leveling Scissor Jack Socket Drill Adapter, Fits 3/8
BESTSELLER NO. 8 in 2020
  • Reduces time and effort to raise or lower scissor jacks
  • Fits 3/8" or 1/2" power drills
  • Works with all 3/4"Hex drive jacks

Replacement Electric Dril Motor Carbon Brushes 30mm x 11mm x 6mm for Power Tool Accessories Repairing Spare Part 2Pcs.

Replacement Electric Dril Motor Carbon Brushes 30mm x 11mm x 6mm for Power Tool Accessories Repairing Spare Part 2Pcs.
BESTSELLER NO. 9 in 2020
  • Carbon brush : is motor or generator, or other rotating machinery fixing part, and the rotating part of pass energy or signals device.
  • Carbon Motor brush : is the transfer of energy or signals between the fixed portion and the rotating part of the motor or generator or other rotating machinery equipment.
  • Brush Washing Machine : It is generally made of pure carbon plus coagulant, appearance generally was square , stuck in the metal stent,
  • Brush Washing Machine : which has a spring pressed it on the shaft,Worn brushes are often the cause of a poorly running motor.
  • Carbon motor brushes : are one of the most commonly replaced power tool components.

SE RA9110 100-Piece Rotary Tool Accessory Kit

SE RA9110 100-Piece Rotary Tool Accessory Kit
BESTSELLER NO. 10 in 2020
  • 100 assorted accessories
  • Wooden storage box
  • Shank: 1/8"
  • Used for cutting, grinding, polishing, drilling, carving, sanding, and more
  • Great for home improvement, hobby, and craft

Wire Wheel Brush - Heavy Duty And Durable Industrial Grade 6" Crimped Wire Brush- Tools & Home Improvement, Power & Hand Tools, Power Tool Parts & Accessories, Abrasive Wheels & Discs - By Katzco

Wire Wheel Brush - Heavy Duty And Durable Industrial Grade 6
BESTSELLER NO. 11 in 2020
  • WHAT YOU GET - A piece of 6 inches round heavy duty and durable Industrial Grade Crimped Wire Brush. This will be a great addition to your toolbox and will surely exceed your expectation. Get your job done fast and easy with our Wire Wheel Brush. Includes coarse crimped with 1.25" arbor + 5 adaptors.
  • PREMIUM QUALITY - Our Wire Wheel Brush is made up of premium quality materials proven and tested for its durability and functionality. This is made of made of 70 gr carbon steel and is copper plated with a max speed 6,500rpm.
  • PERFECT FOR- The Wire wheel brush is a great crimped wire brush with industrial grade. This is perfect for industrial and basic repair works. You can use it at home and office for major and minor repairs. It is used to Use to polish steel, brass &copper objects, use on ready metal surfaces for welding soldering, painting, deburring, rust and oxide removal.
  • QUALITY FINISH - We ensure that our wire wheel brushes will provide a great finish. Made up of high quality materials plus an innovative design which makes the wire wheel brush more effective and long lasting.
  • SATISFACTION GUARANTEED - Be a confident buyer! Money back manufacturer's warranty included when purchased from Katzco. You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high quality products that satisfies your needs. If there is anything you need that we don't offer, we go and find the best for you.

Extreme Tools EXPTRSL Hanging Power Tool Rack Accessory, Silver

Extreme Tools EXPTRSL Hanging Power Tool Rack Accessory, Silver
BESTSELLER NO. 12 in 2020

Interstate Pneumatics LF10-L4H Pressure Switch - 1/4 inch FPT Four Port - Push Pull Swicth 85-125 psi fits Dewalt Hitachi Emglo Porter Cable Ridgid Makita Rolair air compressors

Interstate Pneumatics LF10-L4H Pressure Switch - 1/4 inch FPT Four Port - Push Pull Swicth 85-125 psi fits Dewalt Hitachi Emglo Porter Cable Ridgid Makita Rolair air compressors
BESTSELLER NO. 13 in 2020
  • 6.3 mm unloader valve connection
  • 1/4 inch MPT Female connection
  • Cut off pressure 85-125 PSI
  • Amperage rating 20 Amps
  • Four ports

Installing a Basic Wall Mounted Hand Rail

Installing a hand rail along a stair way will add safety and a decorative touch to a bland stairwell. With a few hand tools and a helper, you can install a hand rail in one day.

Things you will need:

Hand rail
Stud finder
Masking tape
Mounting brackets
Hand tools (hammer, screwdriver, drill, tape measure)

8 Easy Steps to Install a Wall-mounted Hand Rail

1) Measure the stairs:
Locate and mark the spot at the top of the stairs where you want the hand rail to begin. Then walk down to the bottom of the stairs and make on the wall where you want the hand rail to end. The hand rail is usually installed 36 inches above the step, so make your mark on the wall at the 36" height location. Check with your local building codes for the exact measurement. Your helpful sales person at the home improvement store can also probably tell you.

Hand rails usually come in lengths of 10, 12, 14, or 16 feet long and are priced either by the foot or by the length, depending on the type of hand rail and where you buy it. Use a tape measure to check the length between the marked top spot and the marked bottom spot. The railing will need to extend past the mounting brackets; make sure you account for this extra length.

2) Purchase the railing and mounting brackets:
You will need at least 3 mounting brackets, more if the railing is over 48 inches long. One bracket at the top, one bracket at the bottom and additional brackets placed in the middle, no more than 48" apart. When you purchase the railing, you can have it cut to length at the store so make sure you bring your measurements with you.

3) Mark the wall studs and railing height:
Find the stud nearest the top of the stairs and place a 1" wide piece of masking tape where the wall stud is. Run the tape up and down, to give you a true indication of where the wall stud is. Use the tape to mark where every vertical wall stud is located to give you a better idea of where you can place the brackets to hold the hand rail. Wall studs are usually 16 inches apart. Mark each stud so you have a selection of places to mount the brackets.

4) Cut the rail to fit:
Unless you are doing corners or end-caps on your hand rail, you can have the rail cut to length at the store. If you are doing corners, you will need extra inches so you can do a 45 degree miter cut at home; measure the wood and cut accordingly. We installed a straight hand rail with no corners, with a straight vertical cut on each end. It is your preference as to how you want the end of the railing to look. Just remove all sharp edges and sand off any burrs or splinter.

5) Paint or stain your railing:
If you are using a wooden railing, it is easier to paint it or stain it before you mount it on the wall. If you are using a metal railing, you may want to buff it out before installing it on the wall. It is best to prep the hand rail, no matter what material you are going to use, before you mount it to the wall.

6) Install the brackets:
To make sure your railing will be installed straight, it is a good idea to cut a piece of lumber to the height of your railing and use the lumber to mark the same height on the wall at each stud. You can also use a chalk line to indicate where the railing will be installed. Either way, just make sure you are an equal height from the steps for the whole length of the railing.

We had the helpful sales person cut us a piece of 2-by-4 to 36 inches long and when we got home, we placed it on the top stairs, stood it up against the wall and marked the top. That mark was where we wanted to place the bracket. Then we did the same thing at the bottom of the stairs and at the two middle places along the stairs. We used four brackets for our hand rail as it was a straight hall way with no turns. We did not paint our brackets as the finish was a nice metal finish, but if you want to paint them, it will be easier to paint them before you attach them to the wall.

Use a power drill or electric screwdriver to mount the brackets to the wall studs, using the hardware included with the brackets. Read any directions that come with the bracket as they could be helpful. You could use a screwdriver to attach the brackets to the wall stud but as you are going to run the screws through the wall and into the 2-by-4 wall stud, a power drill will make it a whole lot easier.

7) Install the railing:
You may need a helper to hold the rail in place while you attach the rail to the brackets. The rail is lighter to hold than the rail and attached brackets, that is why we attached the brackets to wall first, and then attached the rail to the brackets. Loosely screw into the railing with the bracket hardware at all bracket locations. Once you have the railing in place, check your alignment and if everything looks great, tighten each screw to secure the railing to the bracket.

8) Add finishing touches:
Check the railing for splinters, sharp edges or any other problems. If you have small children, you may want to add plastic end caps to prevent injuries. Children have been know to bump their little heads on the ends of the hand rail so make sure the edges are smooth and rounded. You can use 90-second epoxy to install plastic end caps if necessary.

Article Resources

Personal Experience
Home Depot Sales Associate
www.thisoldhouse.com/toh/video/0,,1631514,00.html
www.popularmechanics.com/home/improvement/4303237

Related Bestselling Lists That You Might Like