Bestselling Power Spindle Sanders in 2021
WEN 6510 Oscillating Spindle Sander
- Powerful 1/2 HP 3.5 Amp motor provides 58 OPM and 2000 RPM
- Includes six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
- Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
- Attach the dust collector of your choice to the onboard dust port to minimize clean-up
- Backed by a two-year warranty
JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase
- Table that tilts to 45-degrees for sanding angled materials
- 1/2-horsepower motor accommodate even the heaviest sanding project
- 1-inch spindle delivers scratch-free finish
- Oscillating action prolongs the sleeve life
- Non-skid rubber feet prevents the unit from slipping
Woodstock D3292 Drum Sanding Kit, 16-Piece
- 1/2-Inch Diameter, 3/4-Inch Diameter
- 1-Inch diameter, 1-1/2-Inch diameter
- 2-Inch long
- 1/4-Inch shank
- Medium grit sleeves
SHOP FOX W1686 1 HP Oscillating Spindle Sander
- Stroke length: 1-1/2-Inch
- Dust port: 4-Inch opening
- Steel table inserts
- Oscillation speed: 72 SPM
- Table height: 35-1/2-Inch
Delta Woodworking 31-483 Heavy-Duty Oscillating Bench Spindle Sander, 1/2-HP, 115-volt
- On board storage for all accessories
- Backed by a 5 year warranty
Great Neck 80135 31 Piece Rotary Tool Accessory Kit
- Storage Case Included
- Maximum Operating Speed 35,000 RPM
- Includes 31 Sanding and Grinding Accessories
- Spindle Lock: Yes
An Expert Talks Power Tools: Circular Saw, Jointer, Band Saw, Scroll Saw, Drill Press, Lathe, Sander and Spindle Shaper
WEN 6510SP80 80-Grit Oscillating Spindle Sanding Sleeves Combo (12 Pack)
- Includes twelve 80-grit sandpaper sanding sleeves; two in each size
- 1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. diameter spindle sleeves
- Perfect for material removal, resurfacing and more
- Designed to fit the WEN 6510 Oscillating Spindle Sander
HQRP AC Power Cord for DeWalt DW845 DW847 DW849-B3 EP9500 Sander Polisher Mains Cable Repair Coaster
VFD 110V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 110V)
- IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized).
- This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.And can be used as a motor speed control and a phase converter.Work well with the Mach 3 controller
- This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc).The input is 1 or 3 phase.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input
- Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
- If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
Delta 31-484 1HP Tilting Spindle Floor Oscillating Spindle Sander
- Unique tilt arbor design with 10 interchangeable spindles
- Cast iron trunion system and precision ground cast iron table
- Backed by a 5 year warranty
Hp Adapter,Dj,3" Spindle Cn538A
- Sold as 1 Each.
- Saves time.
- Allows you to have the next roll ready to load on your printer.
- Provides quick paper changes.
- Helps you provide quality your business depends on.
Triton T20B 20V Li-Ion Replacement 2.0Ah Battery
- Keeps tool upright
- Compatible with all products of the Triton T20 range
- Samsung ICR 18650 cells and intelligent battery charging system
- 30 min fast charge
Benchtop Belt Sander : The One Shop Tool that I Couldn't Live Without
Of all the portable tools in my shop, my benchtop belt sander incorporates more versatility and the best return on investment than any other power tool that I've purchased in the past ten years.
I've been in various aspects of construction and woodworking for around 35 years. Sometimes part-time, sometimes full-time. The past decade has been mostly dedicated to smaller handyman jobs, furniture building, and arts and crafts projects. In all areas of my work, portability is of prime importance. The size of a 4 x 36 benchtop sander makes it easy to haul with me to a job, move to the back porch to work in the sun, or set on a portable work station in my shop. Weight is not a particular factor, and no matter which brand you end up with, the total footprint of the machine is minimal.
What you gain with a tool such as this is ease of use, flexibility of use, and with a little inventiveness some uses beyond what the manufacturer would tell you. Most typically, the average craftsman would use the main sanding surface with the "stop" or "fence" in place to keep small pieces of wood from shooting across the shop unexpectedly. However, using the rounded open end of the belt is a great way to add contouring to any piece of lumber in your hand, or smooth out that concave section of your project.
For more versatility, most sanders of this general design allow the belt table to be stood vertically for doing more critical end grain sanding or prolonged edge work. Because this size machine is so easy to move around and reposition, the intrusive edge of a table top or other obstacles is seldom an issue. Often I'll move my sander toward the edge of my bench, optimizing the best work angle for a particular project. Then I'll secure at least one corner of the base to the workbench with a "C" clamp to keep vibration and the force needed for sanding from moving it out of place. (Rubber feet don't always keep a tool like this in position.)
A sander of this size generally has a quick release feature for ease of changing belts. The disc sanding attachment (if supplied) isn't always as easy, but with hook and loop sanding pads everywhere nowadays, this is changing rapidly. The sanding disc supplied with a particular model can vary from 4 inches to 6 inches in diameter, so know what is best for your type of work when looking to purchase.
Sanding belts come in many grits, from very coarse to very fine. You will learn over time which belt best suits each situation and when to change from one to another. One optional purchase that you really should add is a rubberized belt cleaning "stick". They look like a large art-gum eraser, and they will extend the life of most sanding belts 3 to 5 times by cleaning out belt debris, thereby minimizing burning and plugging of the belt surface. They only add a few dollars to the total cost, but will save twenty times that amount by delaying new belt purchases.
Now for the bonus features. I've used my sander for many items beyond wood, including (but not limited to) plastics, brass, rubber, steel, aluminum, and the occasional fingernail and knuckle. (Please use caution with any power tool.) I've even been known to put a quick edge on a chisel or redress a screwdriver tip. Each of these materials addresses the sanding surface in a unique way, so if you venture outside of the wood realm, be careful. Just because something is made of plastic doesn't mean that it won't get hot when sanded. Use vice grips or pliers when handling small objects to minimize scrapes and burns. Metal items get very hot very fast, and can rip a belt to shreds in the blink of an eye. Again, use caution at all times when doing creative sanding. Know your machine and your own limits when using any power tools, and always wear eye protection. Refrain from wearing loose clothing or unbuttoned sleeves, as they can get wrapped into the sanding belt or disc very quickly.
If I haven't scared you off with the safety warnings and you've read this far, then you are probably thinking of purchasing a benchtop belt sander. Know also that most manufacturers have larger models that incorporate a 6 x 48 inch belt and an 8 inch sanding disc. These would be for the more serious woodworker, but might be suitable for your project(s). The smaller sanders start at around $130. Most reasonable in my opinion. I wouldn't be without one.