13 Best Lab Dispensing Bottles

List Updated September 2020

Bestselling Lab Dispensing Bottles in 2020


Vestil BTL-RC-8 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 8 oz Capacity, Clear

Vestil BTL-RC-8 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 8 oz Capacity, Clear
BESTSELLER NO. 1 in 2020

ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (500ml / 16oz / 1 Bottle)

ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (500ml / 16oz / 1 Bottle)
BESTSELLER NO. 2 in 2020
  • Wash bottle used to wash labware and to store washing solutions, such as acetone or deionized water
  • LDPE body for flexibility, elasticity, and impact, stress-cracking, and moisture resistance, and is lightweight
  • Boston round shape for applications that require a rounded body, short neck, and narrow mouth to store liquid samples and solutions, and dry materials
  • Polypropylene screw closure with its angled stem and draw tube molded in one piece for leak-proof applications
  • Spout can be cut back to increase the flow of washing solution

MENDA 35315 Amber Glass Dispensing Bottle with Stainless Steel One-Touch Pump, 4oz Capacity

MENDA 35315 Amber Glass Dispensing Bottle with Stainless Steel One-Touch Pump, 4oz Capacity
BESTSELLER NO. 3 in 2020
  • Constructed of glass allows storage of fluids not compatible with plastic
  • One-touch pump
  • Translucent allows easy viewing of contents
  • Dispenses approximately 2cc of liquid with each pump
  • Ideal for use with hand sanitizer
  • Genuine Made in the United States of America Menda pump - accept no substitutes. This item is made and stocked in Santa Barbara, CA.

Vestil BTL-RC-6 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 6 oz Capacity, Clear

Vestil BTL-RC-6 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 6 oz Capacity, Clear
BESTSELLER NO. 4 in 2020
  • General-purpose plastic bottle is translucent allowing light but not detailed inspection of contents
  • The bottle and cap are constructed of an FDA compliant natural materials for ideal operation
  • Dispensing bottle is great for accurate dispensing in small areas
  • Cap is design dispenses the contents through a hole at the cone-shaped spout

MENDA 35601 HDPE 8oz Alcohol Dispensing Bottle, with Lasting-Touch Pump, Brown

MENDA 35601 HDPE 8oz Alcohol Dispensing Bottle, with Lasting-Touch Pump, Brown
BESTSELLER NO. 5 in 2020
  • The High Density Polyethylene bottle is suitable with Acetone, Nail Polish Remover, Make-Up remover and other astringents.
  • Opaque brown bottle protects light sensitive fluids
  • Wide Opening makes it easy to refill
  • Alcohol imprint for clear demarcation
  • Made in America for superior quality

Menda 35304 35304 HighDensity Polyethylene/Hdpe/Steel/Low Density Dispensing Bottle/Dispenser Pump

Menda 35304 35304 HighDensity Polyethylene/Hdpe/Steel/Low Density Dispensing Bottle/Dispenser Pump
BESTSELLER NO. 6 in 2020
  • High density polyethylene suitable for many solvents. Square shape provides stability and saves storage space
  • Translucent - allows easy viewing of contents. Custom imprinting available - bottles can be printed from artwork
  • Wide opening that is easy to fill. Dispenses approximately 0.2cc of liquid with each pump
  • Ideal for use with hand sanitizer
  • Made in the United States of America

Gaunt Industries Precision Angled Dispensing tip and 1 Ounce Soft Squeeze Bottle

Gaunt Industries Precision Angled Dispensing tip and 1 Ounce Soft Squeeze Bottle
BESTSELLER NO. 7 in 2020
  • SOFT SQUEEZE 1 ounce LDPE bottle with 45 degree 20 gauge needle

500mL Nalgene Wide Mouth Unitary Wash Bottle

500mL Nalgene Wide Mouth Unitary Wash Bottle
BESTSELLER NO. 8 in 2020
  • Polypropylene Screw Closure
  • LDPE low-density polyethylene bottle/tubulation
  • 500mL

Vestil BTL-RC-4 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 4 oz Capacity, Clear, 2 Pack

Vestil BTL-RC-4 Low Density Polyethylene (LDPE) Round Squeeze Dispensing Bottle with Removable Red Cap, 4 oz Capacity, Clear, 2 Pack
BESTSELLER NO. 9 in 2020
  • 2 pack of General-purpose plastic bottle is translucent allowing light but not detailed inspection of contents
  • The bottle and cap are constructed of an FDA compliant natural materials for ideal operationeas
  • Dispensing bottle is great for accurate dispensing in small areas
  • Cap is design dispenses the contents through a hole at the cone-shaped spout

Gaunt Industries HYPO-350 - Jewelery Maker Flux Dispenser - 1-1/4 Ounce Clear Plastic LDPE Bottle with 20 Gauge Blunt Needle tip

Gaunt Industries HYPO-350 - Jewelery Maker Flux Dispenser - 1-1/4 Ounce Clear Plastic LDPE Bottle with 20 Gauge Blunt Needle tip
BESTSELLER NO. 10 in 2020
  • Precision Fluid Dispenser using your preferred liquid products
  • Flux Dispenser for Jewelry Makers
  • 1-1/4 Ounce Oval Clear LDPE bottle with 20 gauge Stainless Steel blunt needle tip
  • Easy to squeeze plastic bottle
  • Use for Acrylic Paint

Fristaden Lab 5-25mL Graduated Bottle Dispenser, ±0.7 Accuracy, Laboratory Dispensing Bottle, Lab Dispense Bottle

Fristaden Lab 5-25mL Graduated Bottle Dispenser, ±0.7 Accuracy, Laboratory Dispensing Bottle, Lab Dispense Bottle
BESTSELLER NO. 11 in 2020

MENDA 35309 High-Density Polyethylene/Hdpe/Steel/Low-Density Polyethylene/Ldpe Dispensing Bottle, One-Touch Liquid Dispenser Pump, Natural Square HDPE, 6 oz, 6 fl. oz. Capacity

MENDA 35309 High-Density Polyethylene/Hdpe/Steel/Low-Density Polyethylene/Ldpe Dispensing Bottle, One-Touch Liquid Dispenser Pump, Natural Square HDPE, 6 oz, 6 fl. oz. Capacity
BESTSELLER NO. 12 in 2020
  • High density polyethylene suitable for many solvents. Square shape provides stability and saves storage space
  • Translucent - allows easy viewing of contents. Custom imprinting available - bottles can be printed from artwork
  • Wide opening that is easy to fill. Dispenses approximately 0.2cc of liquid with each pump
  • Ideal for use with hand sanitizer
  • Made in the United States of America

Oval Plastic Bottles - 2oz, Green, CR caps - 5 pcs

Oval Plastic Bottles - 2oz, Green, CR caps - 5 pcs
BESTSELLER NO. 13 in 2020
  • Volume: 2oz, Color: Green, Cap: Child Resistant, Quantity: 5 pcs

Retro Dish Soap Apron Pattern

Decorate your dish soap bottle with a retro apron from the middle 1900’s. This simple to make fabric craft requires no sewing. Original fabric dish soap aprons had a bias tape sewn around the outside edge.

Decorate your dish soap bottle with a retro apron from the middle 1900's. This simple to make fabric craft requires no sewing. Original fabric dish soap aprons had a bias tape sewn around the outside edge. Fabric glue is used to create this simple retro craft.

Things You'll Need:

Paper
Pencil
Dish soap bottle
Scissors
Scrap fabric
½-inch bias tape
Fabric glue

Instructions:

Step 1 - Trace around the outside of your dish soap bottle. Draw a curved neckline centered beneath the pour spout. Curve the bottom edge approximately 1/3 of the way up from the bottom of the bottle to create the bottom edge of the apron.

Step 2 - Cut the template for the dish soap apron from the paper. Place the template on the back side of a scrap piece of fabric. Trace around the outside edge of the template. Cut the fabric along the traded line.

Step 3 - Determine the waist of the apron. Position the end of the bias tape approximately ¼-inch below the waist line.

Step 4 - Squeeze a line of fabric glue along the edge of the apron. Slide the bias tape over the glued area. Press into place. Continue the process around the entire edge of the apron. Overlap the bias tape by approximately 1/8-inch and cut.

Step 5 - Flip the apron over. Repeat the gluing process. Lift the edge of the bias tape and squeeze the glue between the fabric and the bias tape. Press into place. Set aside and allow the glue to dry completely.

Step 6 - Wrap a piece of bias tape around the waist line position of the dish soap bottle. Tie a bow in the back. Cut the bias tape leaving a 2- to 3-inch tail. Remove the bias tape from the bottle.

Step 7 - Open the bias tape and squeeze a line of fabric glue along one edge. Fold ¼-inch of the two cut ends toward the center of the bias tape. Glue in place. Press the bias tape together and allow the glue to dry completely before continuing.

Step 8 - Lay the dish soap bottle down on a flat work surface. Position the apron in the desired location. Squeeze a line of fabric glue along the waist line.

Step 9 - Fold the glued bias tape in half to locate the center. Position the center of the bias tape in the center of the apron's waist line. Press into place.

Step 10 - Hold on to the bias tape and sit the dish soap bottle up. Tie the bias tape into position. Allow the glue to dry completely.

Display the apron on the current dish soap bottle and future bottles. Glue small appliqués to the front of the apron for added dimension.

Related Bestselling Lists That You Might Like