13 Best Chamfer End Mills

List Updated June 2020

Bestselling Chamfer End Mills in 2020


CSLU-Tool 6 Pcs 90 Degree 3 Flute Titanium HSS Chamfer Chamfering Cutter Drill Bits End Mill Countersink

CSLU-Tool 6 Pcs 90 Degree 3 Flute Titanium HSS Chamfer Chamfering Cutter Drill Bits End Mill Countersink
BESTSELLER NO. 1 in 2020
  • Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet, thin iron plate, the insulating board or PVC board
  • Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
  • Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
  • High precision and low roughness of the machined surface, strong applicability
  • Sharp and durable, you can use it for a long time

Atoplee 5 pieces 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4,3/8,1/2,5/8,3/4inch

Atoplee 5 pieces 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4,3/8,1/2,5/8,3/4inch
BESTSELLER NO. 2 in 2020
  • Material: HSS4341
  • Shank Diameter: 6mm
  • Surface treatment: Grilled yellow
  • Specifications(inch): 001:3/4;002:5/8; 003:1/2 ;004:3/8;005:1/4
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device(5pcs)

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58
BESTSELLER NO. 3 in 2020
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA

Atoplee HSS 4341 Chamfer Chamfering Countersink End Mill Cutter Bit Countersink Set,5pcs,1/4,3/8,1/2,5/8,3/4 inch (round shank)

Atoplee HSS 4341 Chamfer Chamfering Countersink End Mill Cutter Bit Countersink Set,5pcs,1/4,3/8,1/2,5/8,3/4 inch (round shank)
BESTSELLER NO. 4 in 2020
  • Material: HSS4341;Surface treatment: Gold Finish
  • Original package: re-sealable metal box;Shank: round shank
  • Size:1/4",3/8",1/2",5/8",3/4";Total weight: approx 227g
  • Shank Diameter:4mm,6.5mm,6.5mm,6.5mm,6.5mm;Head Diameter:6mm,10mm,13mm,16mm,19mm
  • Package Included:5pcs Countersink Drill Bit Set HSS 5 Flute Edge Chamfering Taper Cutter

Kodiak Cutting Tools KCT253895 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 90 Degree, 2 Flute, 3/8" Shank, 3/8" Diameter, 2-1/2" Overall Length

Kodiak Cutting Tools KCT253895 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 90 Degree, 2 Flute, 3/8
BESTSELLER NO. 5 in 2020
  • Made In the USA
  • 3/8 Shank Diameter
  • 2-1/2 Overall Length
  • 2 Flutes
  • 90 Degree

Dophee 6 Pcs 90 Degree 3 Flute HSS 4241 Chamfer Chamfering Countersink End Mill Cutter Bit

Dophee 6 Pcs 90 Degree 3 Flute HSS 4241 Chamfer Chamfering Countersink End Mill Cutter Bit
BESTSELLER NO. 6 in 2020
  • Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet,thin iron plate,the insulating board or PVC board.
  • It's very sharp and durable,you use it for a long time.
  • Specifications: Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
  • Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
  • Note: NO Retail Box. Packed Safely in Bubble Bag.

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45
BESTSELLER NO. 7 in 2020
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA

Kodiak Cutting Tools KCT252795 USA Made Solid Carbide Chamfer Mill, AlTiN Coated, 82 Degree, 2 Flute, 3/8" Shank, 3/8" Diameter, 2-1/2" Overall Length

Kodiak Cutting Tools KCT252795 USA Made Solid Carbide Chamfer Mill, AlTiN Coated, 82 Degree, 2 Flute, 3/8
BESTSELLER NO. 8 in 2020
  • Made In the USA
  • 3/8 Shank Diameter
  • 2-1/2 Overall Length
  • 2 Flutes
  • 82 Degree

Niagara Cutter N76593 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 1/8" Cut Cutting Length, 1/4" Diameter

Niagara Cutter N76593 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 1/8
BESTSELLER NO. 9 in 2020
  • 2 Flute design makes these ideal for plung cutting when chip removal is not a problem
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Features a fine-pitch rougher with chamfer
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications

Melin Tool CMG4 Carbide Chamfer Mill, Uncoated (Bright) Finish, 90 Deg Helix, 4 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

Melin Tool CMG4 Carbide Chamfer Mill, Uncoated (Bright) Finish, 90 Deg Helix, 4 Flutes, 2.5
BESTSELLER NO. 10 in 2020
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • Eliminate hand deburring operations and provide uniform finish
  • 90 Degree helix angle

3 Flute 90 Degree HSS Chamfering End Mill Cutter Bit Countersink Drill Bit Pack of 6pcs

3 Flute 90 Degree HSS Chamfering End Mill Cutter Bit Countersink Drill Bit Pack of 6pcs
BESTSELLER NO. 11 in 2020

Titan TC87807 Solid Carbide Chamfer Mill, 4 Flute, Single End, 90 degree Angle, AlTiN Coated, 1/4" Size, 1/4" Shank Diameter, 2-1/2" Overall Length

Titan TC87807 Solid Carbide Chamfer Mill, 4 Flute, Single End, 90 degree Angle, AlTiN Coated, 1/4
BESTSELLER NO. 12 in 2020
  • Premium Sub-Microgran Solid Carbide
  • Made in USA
  • 4 Flute Single End
  • AlTiN Coated

6PCs HSS Drill Chamfer Chamfering 90 Degree 3 Flute End Mill Cutter Drill Bit For Wood Steel Aluminum

6PCs HSS Drill Chamfer Chamfering 90 Degree 3 Flute End Mill Cutter Drill Bit For Wood Steel Aluminum
BESTSELLER NO. 13 in 2020
  • Long life:The material is HSS4241, Industrial grade material for increased durability.
  • Drill bit sizes:head diameter * shank diameter * length, 6.3*5*37mm, 8.3*6*40mm, 10.4*6*39mm, 12.4*10*46mm, 16.5*10*47mm,20.*10*47mm
  • Dirll bit fit:It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet,thin iron plate,the insulating board or PVC board
  • Detail:Shank Head is round. Angle:90 Degree
  • About us:We are a professional sellers of all kinds of tools,we only sell tools,and promise the quality of our products.

Lenny's Sub Shop: Millington, TN

A review of Lenny's Sub Shop in Millington, TN.

I was introduced to Lenny's approximately a year ago. I have some friends who live in Marion, Arkansas, and they took me there one night to get a sandwich. I have eaten at Lenny's probably 6-7 times in many different locations and I have never been disappointed. The service may not always be stellar but the sandwich makes up for any lacking qualities.

This particular Lenny's has 10 booths that seat at least 4 people to each booth. There are also 4 tables with 6 chairs at each table. There were 2 TVs and each was on CNN. The sweet tea, at least on the outside, is Luzianne Real Southern Iced Tea. It should be noted that there is no drive through at this location.

On this occasion I was doing a carry out order for me and one additional person. I ordered the number 1 on wheat bread. This is the classic sub. I get it with everything except for onions, tomatoes, and hot pepper relish. I also add ranch to it. You can get each sub in two different sizes (regular or large). I always order the regular and it fills me up each time. This sub comes with provolone cheese, ham, and capicola. I have ordered this sub on each trip to Lenny's and it has never failed to satisfy.

The person eating with me ordered the number 12. This is the grilled chicken Philly. It comes with grilled onions, chicken Philly, and Swiss American cheese. Despite the fact that I have never ordered this sandwich, I have had a few bites on different occasions and it is very good. My guest absolutely loves this sandwich. I am not a huge fan of the hot pepper relish but I know many people that absolutely love it. The person eating with me put hot pepper relish on their grilled chicken Philly and they said it was amazing.

The classic sub is $5.50 and the grilled chicken Philly is $6.75. On this occasion I did not order any chips or drinks. We do normally make it a meal deal but not on this trip. The ranch that I asked for on my sandwich was $0.50. The sub total of the ticket was $12.75. Our real sub total was actually $8.75 because we were able to get $4.00 off because of a coupon on the back of the Kroger receipt. If you shop at Kroger be sure and keep your receipt because on the back is great deals from Lenny's and IHOP. The coupon for Lenny's reads like this, "Buy 1 Regular Sub or Salad, Get 1 Regular Sub or Salad for $1.50." So my classic sub went from $5.50 to $1.50. It really is a great coupon. Once tax was included ($0.81), the grand total of our two sandwiches was $9.56.

Lenny's is an absolutely delicious restaurant when you want a sandwich and you are in a hurry but you do not want fast food. They cut the meats right in front of you and they have a great selection of chips to with your sandwich. Check out the website here (www.lennys.com/index.cfm) for a location near you.

Click here for additional reviews of restaurants in the Memphis Area.

Related Bestselling Lists That You Might Like