13 Best 3D Printer Interface & Driver Modules
List Updated September 2023
Bestselling 3D Printer Interface & Driver Modules in 2023
Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)
- It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
- Simple step and direction control interface
- Stepper Motor Driver (Header Pins Soldered) is a breakout board for DRV8825 microstepping bipolar stepper motor driver
- Could be operated from 8.2V to 45V and can deliver up to approximately 1.5A per phase. It comes with 0.1"-pitch male header pins installed
- Six different stepping resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step,1/32-step
5x StepStick DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988
- Use to replace the A4988 to upgrade your 3D printer
WINGONEER StepStick 4-layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988
BIQU 3D Printer Part Ultra Silent TMC2208 V1.0 Stepper Motor Driver Module with Heatsink for Control Board MKS GEN V1.4 Ramps 1.4 Ramps 1.6 (Pack of 5pc)
- Flexible microPlyer interpolation unit, the component can provide up to 256 microsteps/step resolution. Even in the limited pulse rate system, it can still be able to achieve sinusoidal control.
- Because stealthChop fine sound technology is widely used in 3D printing, these components are also designed to be compatible with existing 3D printer electronics, saving the need for costly redesign. Both components have pulse/ direction input, and it can be completely independent operation. The configuration is implemented via digital input.
- Based on TRINAMIC TMC 2100 two-phase motor, stepper motor drive board, TRINAMIC TMC 2130 or TRINAMIC TMC 2208, it is compatible with stepstick and pololu a4988 hardware.
- SpreadCycle high chopper frequency, dcStep, stallGuard2 stall detection technology.
- CoolStep current dynamic adjustment technology, it can save 70% of the energy, StealthChop mute.
OctagonStar DRV8825 Stepper Motor Driver Module 4-layer for 3D Printer Reprap RP A4988(5PCS)
- DRV8825 Stepper Motor Driver Module.
- 4-layer,Improved heat dissipation,Simple step and direction control interface.
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher.
- Brand Listing, If you buy is not OctagonStar brand product, You Can Apply for a Refund and Compensation.
KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)
- -The module has a pinout, it can be used as a better performance of the pull-down menu board replacement in many applications
- -DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step)
- -It uses 8.2 - 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
- -Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
- -Built-in voltage regulator (the need for any external logic supply voltage)
GerTong 1 Pcs StepStick 4-layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988
- DRV8825 driver board widely used in 3D printers and small CNC machines
- It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
- Simple step and direction control interface
- Stepper Motor Driver (Header Pins Soldered) is a breakout board for DRV8825 microstepping bipolar stepper motor driver
- Could be operated from 8.2V to 45V and can deliver up to approximately 1.5A per phase. It comes with 0.1"-pitch male header pins installed
ARQQ Heat Bed Mosfet Tube Hot Bed Power Module Expansion for 3D Printer Heating Bed Accessories(Pack of 2)
- Work with anet a8 3d printer heat bed
- Completely solve the hot bed power is too large and the load current issue
- Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
- General Add-on Heated Bed Power Expansion Module
- Note: Any issue please contact us before, we will always here to help!
B bangcool TMC2130 Motor Drive Controller Motor Driver Module for 3D Printer
- No noise: Non noise operation with maximum efficiency and optimal motor torque
- Application: The motor driver is suitable for 3D printer
- Feature: Motor Input Voltage: 4.75-46V. Logic Interface Input Voltage: 3-5V
- Material: Made of aluminum alloy, high quality and durable
- High performance: Load detection of high precision sensorless motor
Clearance Toddler Infant Girls Boys Thanksgiving Day 2PCS Thick Warm Clothes Set STYLE etter Pullover Hoodie Cotton Long Pant (Gray, 4T)
Caoli 1pc Silent TMC2130 V1.0 Stepper Motor Driver Module with Heat Sink Screwdriver 3D Printer Parts
- Driver capability up to 1.2A(RMS) continuous coil current.
- Supports Step/DIR interface and SPI interface two control modes. Combined maximum efficiency and optimum motor torque operation without noise.
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates.
Gowoops CNC Shield V4 Engraving Expansion Board for 3D Printer
- GRBL compatible, worked with arduino nano.
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine
- Can control the two-phase four-wire stepper motor up to 2A.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or other I2C module.
EbuyChX Geeetech DRV8825 StepStick Stepper Motor Driver 4layer PCB w Heat Sink
- Country of Manufacture: CHINA; Material: Plastic, Electronic Part; Net Weight: 4g
- Package Content: 1 x Stepper Motor Driver Module w Heatsink; Brand: Assisi
- Model: DRV8825; Main Color: Purple, Black
- Power Voltage: 3.3V or 5V; Maximum Supply Voltage: 45 V
- Total Size: 20 x 15mm(L*W); Heat Sink Size: 9 x 9 x 5mm
The Value of 3D Printing and Education... In Search of a Solution
3D printing is changing everyday life. From classrooms to offices around the globe, 3D printers are becoming a standard. The evolution of this technology is turning virtual ideas and objects into physical, interactive models.
The purpose of 3D printing is to take an abstract idea and turn it into something real. When someone creates a 3D model, proceeds to make it and then physically touch it -- that supercharges the senses. This is critical in learning and teaching.
People learn by seeing, hearing, touching and creating. 3D model making is an essential component in the learning experience.
Memory Retention
According to 6th grade teacher, Kim Herron, if students "can see it, touch it, feel it, that brings it -- to real [life]. Statistics will show if you hear something, you'll only remember a small portion of it [and] if you see it, you remember a little bit more. See and hear it, a little bit more. If you see it, hear it, touch it, feel it, do it '" you are up to the 80-90 percent [of memory] retention." (YouTube).
A recent research study by Cornell University concluded, "There is ample evidence that learning is enhanced through active experiences -- . A study of knowledge retention showed that only about 20% of knowledge is retained when only abstract conceptualization is involved, but as much as 90% of is retained when the concrete experience is involved" (Lipson).
Designed for Users
Many 3D model makers require teachers to spend hours learning and studying how to operate the machine. However, 2BOT's ModelMaker is user friendly and easy. The ModelMaker was designed from the user's perspective; therefore, students, teachers, etc. without technical backgrounds can use it. Plus, it was built safe for schools and offices, having a protected enclosure and no chemicals.
3D Printing Community
2BOT has created ModelMaker Nation, which is an online forum for educators, where users can share lesson plans, select lesson-linked 3D models for download, and post questions and answers within their peer groups via the discussion board; all at no charge.
Subtractive amp; Additive
3D printers have been around longer than most people think because in past years they were too expensive for the everyday consumer. There are two types of 3D printing: subtractive and additive. Subtractive manufacturing takes material away to create the model compared to additive manufacturing, which adds material layer by layer to create the object.
Using a 3D printer is very similar to a standard printer, just a few clicks of the mouse sends a digital file to the printer; plus, it allows the end user to specify the size of a model and then the machine does the rest: produce a 3D model.
Materials amp; Maintenance
3D printers and model makers use a variety of materials from plastic to foam to wax. The ModelMaker is designed with a keen sensitivity to the use and cost of materials, plus the ability to generate models at unparalleled speeds, while being user friendly and reliable. Maintenance of the ModelMaker is simple, fast and easy '" via a standard shop vacuum.
The Main Point
The value of something is not about the technology behind it; it is about problem solving for the specific consumer of the product. Many companies in the 3D printing market are creating tools instead of solutions. 2BOT decided to do the opposite, manufacture a solution.
To find out more, visit: 2BOT
References:
Lipson, Hod. Printable 3D Models for Customized Hands-on Education. Ithaca NY: Cornell University. PDF.
www.youtube.com/watch?v=YPZOxsSo6EA. 2botmarketing. "Kim Herron Interview." YouTube. 1 June 2020. Web. 29 June 2020.
